shift boot installation guide

Looking for a Saturn LS shift boot? We offer the best ones out there!

1. Pry wooden trim piece off with a flat head screwdriver.

2. Take shift knob off - pry out the staple holding it in.

3. Take off black plastic around the inside of the wooden trim piece.

4. Pry off black pieces holding the boot on.

5. Pry black trim ring off at the bottom of the e brake

6. Slide boot and trim piece off.

7. Remove all of the staples holding the boot in.

8. Remove black trim ring from the boot.

9. Put black trim ring in the boot and use the clips to hold it on.

10. Put rubber band on the top of the boot on the inside and fold the fabric down.

11. Put shift knob back on and snap the whole piece back onto the console.

12. Staple boot to black trim ring.

13. If you do not have a stapler, you can use any epoxy-based glue (3M Super 77, Automotive GOOP or similar).

14. Slide boot and trim piece over the e brake and snap the trim piece on.



Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk. 

Copyright RedlineGoods.com. All rights reserved.

Save 20% today!


Please subscribe to our newsletter.

Get an instant 20% discount and enter our montly $100 CASH sweepstakes!

Get discount