2000-03 INFINITI QX4
shift boot installation guide

1. Remove armrest from vehicle by unscrewing it at the hinge.

2. Separate top and bottom halves by removing the screws visible on the underside of the armrest.

3. In order for the leather to stay put, the factory use some double side tape at the side and around the inside edge. Remove the factory leather or install the RedlineGoods one over it (both versions are possible.)

4. To install the RedlineGoods armrest cover, glue it on top of the factory armrest using epoxy-based glue or double-sided tape. Reinstall armrest back into the vehicle.

CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!

Useful tip

You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.

Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.