1. Remove both gear knobs (twist anticlockwise).

2. Lift out existing boot shroud.

3. Remove the OEM cover from the plastic shroud taking out staples and portions that are glued down and remove the gear knob collar.

4. Flip the main drive gear cover inside out and insert the collar.

5. Cable tie collar and secure in position, invert cover back to normal. Glue cover appropriately onto the shroud trimming off excess tabs. Reinstall back into the car.

6. Remove cover from base by undoing 2 screws from the base support.

7. Remove interior panel by removing 4 small screws and 2 screws on the latch.

8. Pull and glue edges onto the inside of the main cover

9. Trim excess so that the interior panel can be inserted back into the main cover, replace 4 small screws and the 2 screws for the latch. Replace cover assembly back into the supports with 2 screws.

ENJOY YOUR NEW LEATHER ITEMS!