1986-92 JEEP COMANCHE |
1. Pull straight up on shift knob. |
|
2. Pull bezel straight up. |
|
3. Bezel removed.
|
|
4. Bezel / boot upside down view. |
|
5. Bezel / boot top view. |
|
6. Pry apart two pieces of bezel. |
|
7. Two pieces of bezel separated. |
|
8. Drill out the fake allen security bolts (which are plastic) with a 5/32" drill bit. Screw 8-32x1/2" bolts instead. Upper half of bezel with 8-32x1/2" bolts screwed in. |
|
9. Place upper half of bezel over top of shift boot and line up bolts with holes in shift boot. |
|
10. Secure lower half of bezel to top half with 10-24 nuts.
11. Reinstall this assembly back into the car. |
|
CONGRATULATIONS - YOU HAVE SUCCESSFULLY INSTALLED YOUR NEW LEATHER BOOTS!
Useful tip You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking. |
Please subscribe to our newsletter.
Get an instant 20% discount and enter our montly $100 CASH sweepstakes!