2017-25 AUDI A5 |
||||||||||
|
1. Open the armrest, slide it toward to reveal the screws and remove them to take the armrest out of the vehicle. Pry off both plastic panels (they are simply pressure fit into the armrest). Place pad and console into the new leather cover. Center the seams first, then tack the front and back into place. Pictured here was install via nail gun, but you can use glue or staples to adhere the cover to the armrest.
2. Once both ends are secured, pull the sides down, but don't make them tight. The leather is a perfect perfect so align the edge of the new cover with the inside rail where the old leather was attached. Tack the sides into place. |
 |
|
3. Replace the rear panel on the armrest |
 |
|
4. Slide the armrest down onto the existing rails from which it was removed. Ensure the armrest is pulled out (forward) to expose the two set screws. Tighten the set screws. |
 |
|
5. Replace the front panel. |
 |
|
Useful tip You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking. |
|
Please subscribe to our newsletter.
Get an instant 20% discount and enter our montly $100 CASH sweepstakes!
