|
1. Here's what you're looking at.
|
 |
|
2. First, remove the shift Knob, turning it counter-clockwise.
|
 |
|
3. Lift up on the edge of the shift boot closest to the climate
control as shown on the picture
*CAUTION TRYING TO PULL IT FROM THE BACK TO THE FRONT COULD DAMAGE YOUR
PART!*
|
 |
|
4. Remove the shift boot assembly and remove the plastic base.
|
 |
|
5. The plastic base.
|
 |
|
6. Look for the smaller of the two side and put the plastic base
according to the larger. |
 |
|
7. Just like this:
|
 |
|
8. Start gluing the two sides and after the front and the rear and
cut, a little where are the feet.
|
 |
|
9. Glue the smaller sides after the longer ones stick. |
 |
|
10. Reinstall everything in the reverse order of removal. |
 |
|
ENJOY YOUR NEW LEATHER BOOTS!
|
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.
|
